Pipe Cutter- Tools & Hardware in Home
Pipe cutter for home use is one of the most important tools which can be used in plumbing work. This tool is used to cut and enlarge the inner diameter of the pipe. Basically the size of the pipe that is cut depends upon the width of the outer diameter pipe. If the pipe is wider than the outer diameter, then it can be used to accommodate various plumbing works.
In general the cutting blades of this tool consists of two different parts. The first part consists of the blade arm which is attached with the help of threaded fasteners to a shaft and is commonly made of brass or steel wire. The second part is called the cutting blade which has a sharp edge and is attached to the rod that rotates at high speeds. With the help of quick change blade system the entire operation can be done in very less time. So, this is one of the best tools that are used in home work.
The basic function of the pipe cutter is to perform the work which is similar to the cutting operation done by the plumbers. They do the same type of work but on a smaller scale. The main difference between the plumber’s pipe cutter and the pipe cutter for home use is that the former has a larger sized pipe which is suitable for larger diameter pipe fittings while the latter only has a maximum capacity of a pipe which is smaller than an outer diameter pipe.
There are many advantages of using the quick change blade system. The main advantage of using these cutting tools is that they allow you to perform tasks such as repairs, sealing of joints and other pipe related works. To do these jobs you just need to slide the blade under the pipe and then push the button on the handle of the tool which would cut the pipe. There are many other designs which you can choose from according to your personal needs and requirements.
A ratchet pipe cutter for home use is another design which you might want to consider. The ratchet mechanism allows you to lock the pipe joint, which is important if you do not want anybody to be able to open the valve for you. To do this the blades of the tool rotate in clockwise direction and once they come in contact with the opposing teeth of the pipe joint the blades rotate in anticlockwise direction. This is to close the valve and prevent water leakage. The ratchet mechanism works in a similar way to the electric wrench.
A rubber hose pipe cutter for home use is another option available in the market. If you use a rubber hose with a 1-inch inside diameter then the overall length of the tool is one foot. To operate the tool all you need to do is to insert the rubber hose into the pipe and start pushing the blade with the help of the handle. You can find many ratchet systems which allow you to get maximum performance out of your rubber tube pipe cutter.